The M-9000

D-2012C

Specifications

The M-9000 Matrix Mixer is designed to be used in conjunction with optional modules and can be configured for up to 8 inputs and 8 outputs.

9000 series modules as well as existing 900 series input modules can be used.

The most appropriate modules can be selected depending on applications.

It is equipped with signal processing and control functions necessary for sound reinforcement, permitting all parameters to be set at the mixer.

Settings data can be stored inside the unit and called up using the keys on the front panel.

Specifications

The D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the D-2012C’s 12 motorized faders and 8 rotary encoders can remotely adjust their volumes.

Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus.

Audio signals inside the D-2008SP can be monitored via monitor bus through headphones connected to a stereo headphone output.

The D-2012C can be installed on a desk with the additional use of an optional D-2012AS Console Case.

M-110

D-2008SP

Specifications

The M-110 is a stereo mixer mountable in a standard 19″ rack (4-unit size), and realizes easy operation and visibility thanks to the slide faders (100 mm) for IN/OUT volume controls.

It provides three bus lines (monaural×2 and stereo×1) allowing the selection of employed a bus line for each input, and output signal may not be distorted for excessive input as the limitter for monaural inputs is built in the unit.

Easy connection can be made from the rear or upper side as the connector section of the rear panel can be moved to the upper side

 

 

 

 

 

 

 

 

Specifications

The D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio inputs and outputs in total, and to be mounted in an EIA standard equipment rack (3U size).

A built-in powerful signal processing function permits the unit to be used as both a mixer and a signal processor. Its audio input/output and control ports can accept optional plug-in modules, making the unit have a maximum of 32 inputs or 32 outputs and up to 2 control modules.

Using the following optional modules enables the unit to perform their functions: Two D-983s for providing a maximum of 48 contact inputs and 32 contact outputs, D-984VC for VCA control, and D-2000CB for audio data transfer between multiple D-2008SP units.

Each function is set by the dedicated setting software on a PC. Setting contents can be stored in the unit’s internal memory as preset memory, which can be recalled by the D-2008SP without using a PC. The D-2012C, when connected, remotely controls the D-2008SP’s basic operations such as volume control.

M-243

Specifications

The M-243 is a 19″ rack-mountable stereo mixer that comes with two monaural inputs, four stereo inputs, one stereo output and two monaural outputs